Reset Password
If you've forgotten your password, you can enter your email address below. An email will then be sent with a link to set up a new password.
Cancel
Reset Link Sent
If the email is registered with our site, you will receive an email with instructions to reset your password. Password reset link sent to:
Check your email and enter the confirmation code:
Don't see the email?
  • Resend Confirmation Link
  • Start Over
Close
If you have any questions, please contact Customer Service

Who wants to try out the new Downloadable IMC?  

community 38F   
9121 posts
3/4/2011 4:04 pm
Who wants to try out the new Downloadable IMC?


We have a new version of the downloadable IMC for you to try out. It's still in development, but it's ready enough to take for a spin.

What we are looking for in a tester:
- Ideally you use the downloadable version now
- Any Mac users (this version you'll be able to use too)
- Willing to use it exclusively for a few days
- Be willing to tell us everything you think about it, also outline the issues you are experiencing.

What do you need to do to test it?

- Add your name in the comments
- I'll email you a link to the downloadable version in your message center
- Download and have fun

I'm only posting for testers here, but if you know someone who uses the downloadable version, please turn them onto this post.

wd40w 71M
6966 posts
3/4/2011 10:59 pm

Only IF you can guarantee that it can be removed completely and contains not a shred of Flash...if it's html5 I'm in...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


Discretion4Sur 69M
96 posts
3/5/2011 6:11 am

OK - I'll try the mac version....


rockinr55 66M
1689 posts
3/5/2011 6:12 am

I haven't been using the downloadable version, but I'm in if you want me to try it.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rdy2try4 58F  
3330 posts
3/5/2011 7:10 am

I have always prefered the downloadable.. so I am definitely IN!


SexiLuvinGirl 65F
6975 posts
3/5/2011 9:27 am

I don't use it often, Ryan.



Have a safe and happy Halloween!
To Visit My Blog, please click here.


wd40w 71M
6966 posts
3/7/2011 4:25 am

Whoever re-wrote the code concerning our profile pics...should be excised...that's the problem...some nob re-sized our profile pictures...I re-loaded mine back up...seems to be showing now...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/7/2011 8:58 pm

I thought pages loaded slow before...with this new IMC it takes forever for pages to load...coupled with the fact that even though I've got "Public Broadcasting" checked...when I try to view my broadcast...it says I'm broadcasting in private...add to that having to have two windows open in order to see who's online...sorry way too frustrating to use...and if we can't view our own cams...and it's by design that way...really BAD choice by who put this together...not even going to try the "group chat" because I hate having to re-start my machine every 15 minutes...EPIC FAIL...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/7/2011 9:08 pm

    Quoting wd40w:
    I thought pages loaded slow before...with this new IMC it takes forever for pages to load...coupled with the fact that even though I've got "Public Broadcasting" checked...when I try to view my broadcast...it says I'm broadcasting in private...add to that having to have two windows open in order to see who's online...sorry way too frustrating to use...and if we can't view our own cams...and it's by design that way...really BAD choice by who put this together...not even going to try the "group chat" because I hate having to re-start my machine every 15 minutes...EPIC FAIL...
BTW...no access to flash controls when you control click on your window...which means you cannot chose audio settings...LOL I just noticed...when your "Alerts Bar" has something to tell you...it flashes the info on the main title of the page you are on...rather slick that...the new IMC not so much...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rockinr55 66M
1689 posts
3/8/2011 9:52 am

Early impressions of new IMC

I, too, do not like two windows to manipulate.

On the beta system, I would click on Incoming, then Settings, then choose to make an audible tone if I had an incoming message. The only way I can seem to do this on this IMC is to click on Broadcast and when that window opens, click on Messages, and then make my selection. Unfortunately, when I click OK it also chooses whatever is listed under Broadcast. Therefore it launches my webcam. I have to go back in to Broadcast settings and stop broadcast. Although that is what comes up, my webcam remains on until I log off the IMC. (This may be normal since it does the same thing on beta)

When I do launch my webcam, no cam icon comes up beside my handle, so I assumed I wasn't broadcasting. But somebody did view me, so I am assuming I was broadcasting and that this IMC does not indicate to the broadcaster with an icon.

When I attempt to page someone, a chat page immediately appears that shows my initial comment, followed by the pagee saying exactly the same thing. Sometimes a note appears saying xxxx is not available. My question is how does the IMC know this? So far, I have not been able to raise anybody by paging. I'll keep trying with this.

The default listing is "Distance". Although this is the setting I use most often, sometimes I want to view by "Age" or "Number of Viewers". This IMC has the same buttons to click, but will not give me any setting but "Distance".

So far, I want to go back to beta, but I will stick with this and play with it some more.


Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rockinr55 66M
1689 posts
3/8/2011 11:08 am

    Quoting rockinr55:
    Early impressions of new IMC

    I, too, do not like two windows to manipulate.

    On the beta system, I would click on Incoming, then Settings, then choose to make an audible tone if I had an incoming message. The only way I can seem to do this on this IMC is to click on Broadcast and when that window opens, click on Messages, and then make my selection. Unfortunately, when I click OK it also chooses whatever is listed under Broadcast. Therefore it launches my webcam. I have to go back in to Broadcast settings and stop broadcast. Although that is what comes up, my webcam remains on until I log off the IMC. (This may be normal since it does the same thing on beta)

    When I do launch my webcam, no cam icon comes up beside my handle, so I assumed I wasn't broadcasting. But somebody did view me, so I am assuming I was broadcasting and that this IMC does not indicate to the broadcaster with an icon.

    When I attempt to page someone, a chat page immediately appears that shows my initial comment, followed by the pagee saying exactly the same thing. Sometimes a note appears saying xxxx is not available. My question is how does the IMC know this? So far, I have not been able to raise anybody by paging. I'll keep trying with this.

    The default listing is "Distance". Although this is the setting I use most often, sometimes I want to view by "Age" or "Number of Viewers". This IMC has the same buttons to click, but will not give me any setting but "Distance".

    So far, I want to go back to beta, but I will stick with this and play with it some more.

Further trials

I got paging to work somewhat, but more problems. If I have a chat window open with someone and then decide to launch my cam, I lose the chat window. I was chatting with someone, launched my camera on public, but he said (after I connected with him again) no icon appeared by my name on the IMC. The only way, he said, to view my cam was off the alerts on his home page. Now the contradiction is that someone else did view my camera, but when I asked him how he found it, I got no reply. I may have to explore this further.

Also, I like to be able to allow the site to turn on my cam, but with this IMC, it doesn't ask me if I will allow; it just turns it on. Do I have to make a setting somewhere?


Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rockinr55 66M
1689 posts
3/8/2011 11:34 am

    Quoting rockinr55:
    Further trials

    I got paging to work somewhat, but more problems. If I have a chat window open with someone and then decide to launch my cam, I lose the chat window. I was chatting with someone, launched my camera on public, but he said (after I connected with him again) no icon appeared by my name on the IMC. The only way, he said, to view my cam was off the alerts on his home page. Now the contradiction is that someone else did view my camera, but when I asked him how he found it, I got no reply. I may have to explore this further.

    Also, I like to be able to allow the site to turn on my cam, but with this IMC, it doesn't ask me if I will allow; it just turns it on. Do I have to make a setting somewhere?

Another glitch

If I click on xxxx on the IMC, and then go to view his profile, I get the following window. "xxxxm=236508359_85649 was not found". I've tried this with various members and always get the same window.


Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



donttellandiwont 65M/60F
96 posts
3/8/2011 5:46 pm

i will give it a try what do i have to lose


rockinr55 66M
1689 posts
3/9/2011 9:09 am

    Quoting rockinr55:
    Another glitch

    If I click on xxxx on the IMC, and then go to view his profile, I get the following window. "xxxxm=236508359_85649 was not found". I've tried this with various members and always get the same window.

Another update

I've launched my webcam various times with still no icon by my handle. The only people to view me are ones that connect from the alert bar. Still not able to view profile from IMC(still does the same as above) and if I try to view a profile from the webcam page, it sends me to a "Join AdultFriendFinder" page.


Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rm_NassyFox 61F
37014 posts
3/9/2011 2:43 pm

Send me the Windows version.


rm_vwspacey 53F
62 posts
3/10/2011 1:31 am

Adding my name to test new downloadable IMC
vwspacey


X X VW XX


rm_vwspacey 53F
62 posts
3/10/2011 1:32 am

Who wants to try out the new Downloadable IMC vwspacey

X X VW XX


donttellandiwont 65M/60F
96 posts
3/10/2011 5:14 am

Hi there i would really like to try this out..thanks


rockinr55 66M
1689 posts
3/10/2011 9:57 am

Ryan

Please email me the update.


Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rm_a704guy 48M
55 posts
3/10/2011 10:17 pm

Interesting. Hope this works better than all previous versions, all of which were memory hoggs.


wd40w 71M
6966 posts
3/10/2011 11:53 pm

Does me no good to even try to test this if I Can't view my OWN cam... Or if folks don't even KNOW that I'm broadcasting...see the screen captures...sheesh...[image]

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/11/2011 12:09 am

As proof of no one knowing that I'm broadcasting...here's a screen capture of Male webcams and my broadcast window...I should be the first one on that list...nowhere to be seen am I? Seeing as how you removed any indications of our online presence on our profile pages...how am I really supposed to test this? [image]

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/11/2011 3:04 am

Let me apologize to all the standards who cannot view the screen captures...paging does not work...trying to chat with someone using group chat does not work...reconnect and report for abuse does not work...and no indication that my cam is on what so ever...as seen in this screen capture...[image]

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/11/2011 3:06 am

You will note from the last screen capture that I was broadcasting for three hours public with group chat...in all that time no viewers at all...bring on the next version please...this one is a miserable failure...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 12:46 am

Ok...still no Flash controls on command click...plus when I open a cam from the list on the second of three windows that have to be open to use this...no nickname no rating...no paging...only the "Report Abuse" button which I'm unwilling to test on any random member...it's basically just the cam with lots of white space around it as all except Standard members can see in this screen capture...[image]

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 12:49 am

Still no indication that I'm broadcasting...even though it is set to "Public With Group Chat"...using the "search for member" field yields this result...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 12:53 am

Going to the Members Broadcasting Page...running a search for Males Broadcasting it shows me on the page with a cam icon but I get this result...even though I'm Public Broadcasting With Group Chat enabled...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 12:58 am

Seeing as how most versions of this IMC over the years have had some things ASSbackwards...I decided to try Private Broadcasting...using the link from the Members Broadcasting Page and got this result...my cam but no audio...the frame rate on the cam is marginal at best...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 1:05 am

Now have tried all settings for broadcast...and now it only shows me as Private Broadcasting regardless...Next...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/12/2011 2:37 am

As you will note from the screen capture I broadcast PBWGC for a total of 1hr 30 min...no views no pages...I could page others from the Who's Broadcasting page...but the window in the IMC would never re-load the list view after my search for myself...to have to have three windows plus the site page open is really asking for trouble...one window like the old IMC would be far better IMO.

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/13/2011 12:09 am

Fired it up tonight and got this result when I went into a chat room...cam icon was showing and folks could view my cam...however...I was supposed to be broadcasting with group chat...and this is what they saw...I had no indication they were viewing my cam either...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/14/2011 1:43 am

Seems as if there was a site outage this weekend...which ate several posts I made with screen captures...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rm_FXSBOB3 48M
4437 posts
3/14/2011 7:26 am

    Quoting community:
    Sorry, the latest version is 1.28, not 1.27.

    Sent out the 1.28 on Friday evening.

    Thanks again. Hope you guys have a great weekend.
On a FRIDAY,,,WHAT's what happened to the SITE this weekend!!!


AdultFriendFinder
Parody Of a
Real
Sex Site


wd40w 71M
6966 posts
3/15/2011 2:19 am

Hiya Dom...I had posted about two more posts with screen shots...and the site ATE them...was very sketchy here this weekend...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rm_FXSBOB3 48M
4437 posts
3/15/2011 10:31 am

    Quoting wd40w:
    Hiya Dom...I had posted about two more posts with screen shots...and the site ATE them...was very sketchy here this weekend...
Still not seeing WD's screen posts.

Cam connection with WD last night- monday,3/14 -was very poor!!
Vid was very good,although very slow frame rate.Audio was good even in a large room.
>>>BUT there was a ""connectivity"" issue between the vid and Multiple Chat windowS that opened! The chat window in 'group chat' did not seem to work. There was a (seemed to be automated,only since friday has this appeared on ALL cams I view.) 'private chat' that opened. And the orginal chat window that opened.WAY too much going on,and no way to know which was actually working,as replies would appear in different windows!


AdultFriendFinder
Parody Of a
Real
Sex Site


wd40w 71M
6966 posts
3/16/2011 1:26 am

    Quoting rm_FXSBOB3:
    Still not seeing WD's screen posts.

    Cam connection with WD last night- monday,3/14 -was very poor!!
    Vid was very good,although very slow frame rate.Audio was good even in a large room.
    >>>BUT there was a ""connectivity"" issue between the vid and Multiple Chat windowS that opened! The chat window in 'group chat' did not seem to work. There was a (seemed to be automated,only since friday has this appeared on ALL cams I view.) 'private chat' that opened. And the orginal chat window that opened.WAY too much going on,and no way to know which was actually working,as replies would appear in different windows!
That wasn't the IMC's fault entirely...was on Zazou's laptop a windows machine (I really don't like windows machines) and the set up was way weird...ended up opening and closing several cam windows at a time...and trying to get a page through to anyone was very problematic...didn't help that Zazou had paged everyone on the list at first either...it was chaos...but a good time was had...glad that you made the attempt at viewing our "Virtual M&G"...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/16/2011 10:10 pm

Always check my email before I log in here...none to be found...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:09 am

When I finally got the "latest and greatest" and read the email concerning my being a ham fisted neanderthal who made too many changes too fast so that it overwhelmed their too puny software...and that maybe I didn't know how to turn on the audio...I fired it up using PBWGC...for those flummoxed by anagrams that stands for Public Broadcasting With Group Chat...I used the search field (a BIG mistake I later realized) found my cam and opened it...wow looks like it's functioning right? Well I typed in a few words for a test...no indication in the cam window that I opened...I tried to reset the "Who's Online Window...no such luck...just sat there and spinned...it never reset...so I stopped the cam...logged out of the IMC and tried again...broadcast duration 30 minutes...no viewers and no pages...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:14 am

For my next test I used PB...Public Broadcasting...once again used the search field for my cam...yeah should not have done that but It was convenient...you will note...no indication of a cam...duration of broadcast 30 minutes...no viewers or pages...stopped broadcasting and signed out once again...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:19 am

Decided to try PB once again...this time used the Who's Broadcasting Page search...the one in the upper left of the page...when the page reloaded...the entire top half of the page was the lovely "Pro Cammers"...really not amused...scroll down find my Profile...click on the view my cam link and voila! Once again broadcast duration 30 minutes...and quite obviously no viewers or pages...and the state of the Who's Broadcasting page never reset...


"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:23 am

Well with the ASSbackwards mode fully engaged...I tried PB...which in this case stands for Private Broadcasting...worked on the second version...nope...did a search on the Who's broadcasting Page...I wasn't there...so maybe it's "working as designed" a phrase this site uses a lot...again same procedure 30 min broadcast no viewers or pages...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:27 am

For my next go round...I went back to PBWGC...was unable to find my cam broadcasting...so I tried entering a Flash Chat Room...with the following result...no cam icon showing by my name...and greyed out when I clicked my name...30 min broadcast no viewers or pages...logged off...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/18/2011 12:35 am

During the last test...I tried paging someone from the webcams of the Who's On Line window...the one without webcams never ever reset to see just who was just on IMC without cams...cause I broke it the first time apparently by using it...here was the result of the page...rather interesting note the uses of "undefined"...and BTW...this thing does NOT shut off...even if you click Quit...it merrily rolls along...had to use Force Quit...not a very good option...and still no command click for adjustments...and it's a resource HOG...like most Flash applications...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


community replies on 3/18/2011 4:45 pm:
Got it, thanks

Jimbo698869 57M
7 posts
3/18/2011 9:59 pm

please id like to try out the down loadable IMC my name on here is ejevans8 thanks Jim


rockinr55 66M
1689 posts
3/20/2011 10:32 am

I still have no cam icon by my handle on the im. I tried broadcasting in public, public with chat, and private. Stayed 20-30 minutes with no views or pages.
Still can't get anybody's profile off the im. Still getting xxxxm=236508359_85649 was not found.
Tried paging a few people and only got xxxx is not available. I'm pretty sure they were available, but I will check more on that.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rockinr55 66M
1689 posts
3/20/2011 10:59 am

    Quoting rockinr55:
    I still have no cam icon by my handle on the im. I tried broadcasting in public, public with chat, and private. Stayed 20-30 minutes with no views or pages.
    Still can't get anybody's profile off the im. Still getting xxxxm=236508359_85649 was not found.
    Tried paging a few people and only got xxxx is not available. I'm pretty sure they were available, but I will check more on that.
Just noticed something else. Clicked on a cam for a guy that I know always cams public with chat. The window that came up was public with no chat. So I checked him out on the current site im, and sure enough, he was public with chat.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rockinr55 66M
1689 posts
3/21/2011 3:27 pm

Further update

Today I set up on public with chat. There was no cam or chat icon by my handle as usual. After about ten minutes, I had a viewer. I asked him where he found my broadcast since there were still no icons, but got no answer. This viewer stayed with me for quite awhile so I did some checking out. The first page refresh I got after he tuned in, I got a cam, but no chat icon. The next refresh I went to no icons. For the next half hour, both cam and chat icons would go off and on intermittently with each refresh. When they were on, I would sometimes get another viewer. With them off, nothing. Sometimes when they were off, it would read I had 1 viewer, sometimes 0 viewers. I got no response from any viewer whether I talked to them on my chat page or sent them a page. I also had my audio on and tried talking to them. One time when my icons were off, I searched for myself on the view webcam page and I was there. I clicked on to myself and I came up with group chat and my audio was working. This is how the first viewer must have found me.

Some observations on paging. I tried paging a guy who always talks to me and the page read he was not available. Possible, but unlikely. When I tried to page those viewing, it said they had received my page and wait for their reply. Nobody ever replied, but that is possible since a lot of people watch without commenting. I have also had two occasions where I was paged by someone who was not viewing. When I clicked on accept, nothing would happen. I quickly looked up one of them on the im and sent them a page. When the chat window opened, the first line on the page was the message they sent me, and the second line was the message I sent them when I paged back. I was able to chat with this person, but got no feedback before he vacated the chat session.

I still get the same error if I try to view anyone's profile from anywhere on this im, whether it me the list, or their broadcast, or a chat page.

Still hate the 4 windows required to run this.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



rockinr55 66M
1689 posts
3/21/2011 3:36 pm

Should have read wd40w's comments first.

The Who's Online page will only refresh on its own. If you click the refresh option, you get a continuous whirling disc. The only way I found around that was to click on to the webcam tab and then click back to the Who's Online tab. Then it would refresh.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



wd40w 71M
6966 posts
3/21/2011 11:22 pm

    Quoting rockinr55:
    Should have read wd40w's comments first.

    The Who's Online page will only refresh on its own. If you click the refresh option, you get a continuous whirling disc. The only way I found around that was to click on to the webcam tab and then click back to the Who's Online tab. Then it would refresh.
Tried that...it never refreshed...also my cam icon would disappear after about 30 minutes in chat rooms...I've hope for the latest...but not holding my breath...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/22/2011 1:48 am

Yeah...downloaded the de-bugger...not that it will do that much good...did come across this phenomenon though...did the search on the Who's Broadcasting Page...although I show as broadcasting without audio...audio is ON BTW...click on it and I'm Broadcasting in Private...so I go into a chat room...theres a cam icon...I click and get this...you will note there is no broadcast clock in the upper right corner...and audio is working...I will send to you a screen cap of my activity log concerning the chat...if I try to post it here the site will deny/and or obscure all coding...this is by far the weirdest one of all...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


wd40w 71M
6966 posts
3/22/2011 1:59 am

Just a FYI...Adobe has released updates within the past 24hrs for all OS's...so everyone should go there and do a update...tried all the broadcasts and although I showed as broadcasting...every time I tried connecting it would come up as Private...with the exception as noted below...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rockinr55 66M
1689 posts
3/28/2011 5:30 pm

Oh where to start on version 1.33.

First of all, I still can't bring up anyone's profile from the IM. Still reads xxxm=a big long number cannot be found.

For camming, no matter what I try, I cannot get a cam icon to come up next to my handle.

Sometimes when I try to broadcast and I have chosen an option and click OK, nothing happens. The black window used for choosing options either does not close, or if it does, no broadcast window appears. My cam is on and I did find myself on the who's broadcasting page, but still no broadcast window.

If I shut down and fire up again, I can usually get a broadcast window to appear. As far as options go, if I choose public with group chat first, my broadcast window will appear with a chat page. If I choose public or private first and then try to go to public with group chat, although it will say I'm broadcasting with public chat, I get no chat page. No matter what option I have chosen for broadcasting, if I go to the black window and click on stop broadcast, it changes my broadcast window to private. If I click on stop broadcast on my cam window and the black window comes up with stop broadcast already chosen, it will stop broadcasting.

A couple of times when I have chosen different options on the IM page such as age, number of viewers, etc., when I try to go back to distance, it is reading as if I'm at AdultFriendFinder. All my closest handles are in the bay area. The only way to correct this was to reboot the IM.

I've tried broadcasting various times, but the only people to view me are people from my network that were online when I started and they pulled my cam from their alert bar, or people that happen to be scrolling the who's broadcasting page and pulled my cam from there.

Re: paging. I've tried paging people with no success, so I've gone to the site IM and paged them and they have answered, telling me they received no page with the 1.33 IM. I then have had them try to page me on the 1.33 IM with no success.

I have tried this IM various times over various days with the same results.

Once we believe in ourselves, we can risk curiosity, wonder, spontaneous delight, or any experience that reveals the human spirit.---E.E. Cummings



wd40w 71M
6966 posts
4/8/2011 12:14 am

I've gotten some feedback from other members testing and...it seems that turning on their cam triggers their AVG anti-virus software...wondering if any other users have experienced this...or if it's been reported...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


Muoto89 34M

4/16/2011 12:16 am

I would like to try out the new downloadable IM i have the original and am not very impressed. My name on here is Muoto89


PerpetoMobile13 67F
3218 posts
4/17/2011 4:22 pm

Ryan,

I know I;m late but could you please include me in volunteers list for the new IM. I can not use mine for the past couple of months and the guys weren't able to figure out the reason.

Thanks in advance

~~I may be no better, but at least I am different.~~ Jean-Jacques Rousseau

~~Stop by my adventure land ~♑~Reambiguating the world~♑~


wd40w 71M
6966 posts
5/6/2011 3:15 am

Okies...up to version 1.54...once again command clicking does not bring up settings...really need that to do a proper test...can't select audio without it...broadcast for 3hrs...folks could see but not hear me...even though I had the audio set to "on"...could page folks and lo and behold they got the pages and could respond...however when sent a cam invite...my cam wouldn't open for them...I however could open my own cam...how I knew my audio wasn't working for sure...could you please send Ionlyshow a copy of this one? She is very interested in trying it...and seeing as how she is one of the longest lived and more popular broadcasters here...it would be good to get her feedback.

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rm_FXSBOB3 48M
4437 posts
5/6/2011 6:48 am

    Quoting wd40w:
    I've gotten some feedback from other members testing and...it seems that turning on their cam triggers their AVG anti-virus software...wondering if any other users have experienced this...or if it's been reported...
MMMM~~~
Since the test started I've had 3~4 times that my a/v has wiped out the STANDARD IMC. Its not a regular thing,hadnt really thought about it till I read this.Could the IMC versions be crossing over.As I mentioned in the "questions for april 4th" thread in the live from AdultFriendFinder group last monday evening there was an issue with the site.I stated there the IMC was also effected~I did see a 'new/different' format/layout.Thinking back~it has been since then that the a/v events have happened for me. I will watch this closer now and if need be leave a follow-up here


AdultFriendFinder
Parody Of a
Real
Sex Site


wd40w 71M
6966 posts
5/7/2011 12:53 am

    Quoting rm_FXSBOB3:
    MMMM~~~
    Since the test started I've had 3~4 times that my a/v has wiped out the STANDARD IMC. Its not a regular thing,hadnt really thought about it till I read this.Could the IMC versions be crossing over.As I mentioned in the "questions for april 4th" thread in the live from AdultFriendFinder group last monday evening there was an issue with the site.I stated there the IMC was also effected~I did see a 'new/different' format/layout.Thinking back~it has been since then that the a/v events have happened for me. I will watch this closer now and if need be leave a follow-up here
The folks who contacted me were using the beta downloadable...but that does bring up some rather interesting possibilities...I do know that if I open someones cam from the who's broadcasting page rather than the list window of the beta...that the pages react differently than with the standard IMC...not having A/V on my Mac...never had any hiccups like that...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rm_FXSBOB3 48M
4437 posts
5/7/2011 12:31 pm

    Quoting rm_FXSBOB3:
    MMMM~~~
    Since the test started I've had 3~4 times that my a/v has wiped out the STANDARD IMC. Its not a regular thing,hadnt really thought about it till I read this.Could the IMC versions be crossing over.As I mentioned in the "questions for april 4th" thread in the live from AdultFriendFinder group last monday evening there was an issue with the site.I stated there the IMC was also effected~I did see a 'new/different' format/layout.Thinking back~it has been since then that the a/v events have happened for me. I will watch this closer now and if need be leave a follow-up here
It does not appear to effect the actual IMC window operating/refreshing.Only chat windows.
When it has happened it stops incoming messages/comments in open/active chat windows and if I send a comment have been told by other members they do see what I send.
I make a page after it happens I only see the 'wait for responce' message(even from known bots/ones with auto-replies)It is unknown if it stops incoming pages(how could I know)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Quoting wd~~
""...I do know that if I open someones cam from the who's broadcasting page rather than the list window of the beta...that the pages react differently than with the standard IMC...""
....
I have also noticed recently on the standard IMC certain pages react differently.It is consistantly the same members that I see this happening with.
Some when I page the window will have all the responce messages showing~declined/please wait/has recieved~show up~each one rapidly flashing through.Then if the member does reply,the 'close' button will stay centered in the window.
,,,,
One other recent oddity~~
a few members I have chatted with will have the green 'member X has entered' message appear before each comment that that member makes.And Even rarer I have also the green 'entered message AND the red 'member has left' message appear in the same window as the other member makes each comment.(green before comment,red immedately after comment)
And last~I don't see the 'member has left' meesage appear correctly in a normal use,only as mentioned above or if the member actually logs off the IMC.I have left chat windows open for extended periods waiting for replies until the 'member has left' msg appears.Then next chat with that member find that the member had logged off appox the same time the msg appeared in the window.But the member had actually left the chat an extended time period before the msg appeared.


AdultFriendFinder
Parody Of a
Real
Sex Site


wd40w 71M
6966 posts
5/7/2011 5:58 pm

    Quoting rm_FXSBOB3:
    It does not appear to effect the actual IMC window operating/refreshing.Only chat windows.
    When it has happened it stops incoming messages/comments in open/active chat windows and if I send a comment have been told by other members they do see what I send.
    I make a page after it happens I only see the 'wait for responce' message(even from known bots/ones with auto-replies)It is unknown if it stops incoming pages(how could I know)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Quoting wd~~
    ""...I do know that if I open someones cam from the who's broadcasting page rather than the list window of the beta...that the pages react differently than with the standard IMC...""
    ....
    I have also noticed recently on the standard IMC certain pages react differently.It is consistantly the same members that I see this happening with.
    Some when I page the window will have all the responce messages showing~declined/please wait/has recieved~show up~each one rapidly flashing through.Then if the member does reply,the 'close' button will stay centered in the window.
    ,,,,
    One other recent oddity~~
    a few members I have chatted with will have the green 'member X has entered' message appear before each comment that that member makes.And Even rarer I have also the green 'entered message AND the red 'member has left' message appear in the same window as the other member makes each comment.(green before comment,red immedately after comment)
    And last~I don't see the 'member has left' meesage appear correctly in a normal use,only as mentioned above or if the member actually logs off the IMC.I have left chat windows open for extended periods waiting for replies until the 'member has left' msg appears.Then next chat with that member find that the member had logged off appox the same time the msg appeared in the window.But the member had actually left the chat an extended time period before the msg appeared.
I've seen that too in the chat windows...also the cam frame rates are incredibly slow...sometimes stopping completely and then doing a fast-forward to catch up...I will add that the beta doesn't seem to play well if you are logged into the site proper...seems to work best when you are not logged into the site. I'm also wondering which version of Flash they are using for the beta...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


rm_FXSBOB3 48M
4437 posts
5/8/2011 11:23 am

    Quoting wd40w:
    I've seen that too in the chat windows...also the cam frame rates are incredibly slow...sometimes stopping completely and then doing a fast-forward to catch up...I will add that the beta doesn't seem to play well if you are logged into the site proper...seems to work best when you are not logged into the site. I'm also wondering which version of Flash they are using for the beta...
""I will add that the beta doesn't seem to play well if you are logged into the site proper...seems to work best when you are not logged into the site.""

EXACTLY~~
Same with the standard version,I have to log on to access the link,but I go no farther than the log on page for best results.


AdultFriendFinder
Parody Of a
Real
Sex Site


MrMe4U2Enjoy 49M

5/17/2011 1:31 pm

This is one of the major problems with this site. Most of the crap is still in development but you still feel it is good enough to use. The term "GOOD ENOUGH" means NOT GOOD. It's Not ready. Thats why this site never works properly. I watch these blogs and experience most of the same problems as the rest of the people. I look at your responses and you just lead people in circles saying that your site is superior and if there is a problem that it is the users fault.
OK, So it is the users fault that the Group chat IM doesn't load the videos
OK, Its the users fault that the pages refresh and go Blank or only refresh part way
OK, so its the users fault that majority of the profiles on here are created by affiliate marketers using other sites promotional tools to create profiles
OK, Its the users fault that the site burbs and deletes accounts or passwords.
OK then its the users fault that when you send out 50 friend invites at a time that every 2 or 3 times it reveals the users personal email addresses.
When are you going to take responsibility and say, THE SITE HAS ITS PROBLEMS.


wd40w 71M
6966 posts
5/18/2011 12:46 am

I took the liberty of forwarding the download link to Ionlyshow...her review follows..."It's even worse than the standard IMC...and it completly stopped working after I got 245 viewers." Needless to say she's been one of the longest lived broadcasters here...she's always one of the best broadcast quality cams here...having to cope with up to five windows being open is just not very user friendly...and not being able to command click to adjust Flash settings is just wrong...I realize it's a "beta"...but without basic controls it's very hard to test properly.

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


Muoto89 34M

6/14/2011 10:01 pm

I send in a comment a long time ago for wanting to use the beta imc but never got the link I was wondering if your still looking for testers and if you are could you please send me the link. I am currently using the old imc client and would love to help make the new one better


mistervanilla 62M
193 posts
7/12/2011 12:43 pm

MAC user here... quite curious to find out if this would work.


fencelessone 67M
1 post
1/23/2012 11:15 am

I would like to try it! Please send me the files! Thanks


thesexxfactor2 53M/59F  
37 posts
1/28/2012 3:19 am

i would love to try the new version. send me a link. i have both pc and a mac.


KissLickMeMt 54F
16 posts
1/28/2013 12:26 am

I would definitely love to try it, had to reformat and I lost the old version, hate the browser one, miss my downloaded one!


wd40w 71M
6966 posts
8/25/2016 12:07 pm

    Quoting  :

Please note the date of the post...03-04-2011...They decided not to continue with the downloadable version of the IM...If you are having problems...Follow the link for feedback on your home page...Post over at the Site Support Blog also...Hope it helps...

"Illigitimi Non Carborundum Est" W.F. "Bull" Halsey wd40w


Become a member to create a blog